A mechanical cotton picker is a complex and large piece of machinery designed to do the work of hundreds of field laborers in a short amount of time. It has a lot of moving parts to it that are extremely important. Cotton pickers generally come in two types, though some newer models will combine features of both, as well as cotton harvesting machines, which used to be separate devices. The spindle picker, a machine that uses rotating spindles to pull off cotton from the boll, was the first successful picker and remains one of the most common types of cotton pickers. The cotton stripper-type picker, a machine that removes the cotton from the boll and separates other components of the cotton plant, is used with success in areas such as Texas and Arkansas. Both types of pickers substantially reduce the time and human effort needed to pick cotton and are invaluable as labor-saving devices.
The two major types of cotton pickers work in significantly different ways and often include features of other less complex machines that were once themselves separate from the picking machines. The traditional spindle picker works through the movement of moisturized spindles that pull the cotton off the plant while spinning, allowing the cotton to neatly be removed from the spindle after a sufficient amount has been collected. The cotton is then removed by a doffer and blown towards a basket for collection to be placed in a module builder, a separate machine for baling the cotton. Because of their "soft" method of collection, cotton pickers can be used throughout the picking season and generally do not pull more than mature cotton.
A cotton picker is a very complexly designed machinery. Pixabay
By contrast, a cotton stripper, used in areas where only a single harvest can be reasonably expected or multiple picks are infeasible, actually tears the entire cotton boll, seed cotton and all, and is useful for harvesting not only the seed cotton but also the cotton by-products. A stripper is generally used at the end of a harvest when the growing season is almost over because it completely removes the cotton– including the immature seeds. At the end of the season, there is presumably no more picking to be done for the year so it's okay if the other seeds are disrupted. These machines are popular primarily in Texas and Arkansas, and have a long history there, as will be discussed later.
While module builders have been used over the decades for baling cotton, newer models of both types of machines often include baling equipment built-in, thus reducing the need for a module builder. For smaller growing areas, often a single cotton picker can do most of the work needed for picking, harvesting, and baling cotton.
Rembert and Prescott's 1850 model of the cotton stripper represented the beginning of a long evolution in the development of cotton picking machines. The earliest models of cotton pickers were often good at harvesting plants, but not the seed cotton. Due to this, John Rust's 1932 spindle picker revolutionized the industry in terms of picking seed cotton. His 1936 demonstration of the spindle picker led to a large-scale revolution in the industry of cotton picking, and the spindle picker remains the most well-known model of cotton picking machinery today.
Meanwhile, cotton strippers had a divergent history with an identical origin point, one that goes back to the earlier attempts in developing harvesting machines before Rust's spindle picker and closer to Rembert and Prescott's original design. The first cotton stripping patent was given to John Hughes in 1871, and the machines became a staple in areas such as West Texas.
Because cotton strippers could remove the whole plant, they obviously had utility for more than just the soft seed cotton. The first cotton strippers were actually mule driven and existed before the great depression, often mistakenly called "cotton sleds" because they were placed on sled runners. But it was not until 1931 that Deere Corp began selling mechanical cotton strippers on a large scale. The earliest stripping machines were not commercially successful, but the rise of cotton stripper sales took off after the Great Depression, with John Deere continuing as one of the leading producers of cotton strippers.
Because of the complexity involved with mechanical cotton pickers, breakdowns are usually for serious and identifiable reasons. If a part fails on a cotton picker, it's best to go with experts who understand how cotton pickers work and what goes wrong. Mechanical failures are often due to parts that need to be rebuilt or replaced. Due to the nature of outdoor work, there are a number of ways things can go wrong even with the best cotton pickers available. When parts need to be replaced and pickers need to be fixed, it would do cotton harvesters good to contact Certi-Pik, USA.
Such machines are used to save time and reduce human effort. Pixabay
Long regarded as experts in cotton pickers, cotton strippers, and other cotton harvesting machines, Certi-Pik, USA is well-known in the United States and internationally as a leader in replacement parts for all types of cotton pickers and stripping machines. Not only does Certi-Pik understand the nature of cotton picker failure and diagnosis, but they also carry a full line of parts and supplies for cotton pickers to get your machine up and running again. Their knowledgeable staff will be able to help you get the parts you're looking for.
Certi-Pik proudly carries complete sets of parts for all of the top mechanical cotton pickers and strippers, including John Deere and Case IH, and CNH model harvesters. Certi-Pik carries a full line of replaceable parts for your cotton picker that includes parts such as cam tracks, nuts, hoses, scrapping plates, picker and grid bars, gears and more.
They can also custom build parts for your cotton picker, as well as rebuild parts when needed if they are not readily available. Cotton machine owners all over the United States (and the world) trust Certi-Pik to have the parts they need when something goes wrong with their machine.
Also Read- Ways to Make Money in the Stock Market
If it's not obvious yet, modern cotton harvesting machines are big, have a complex history, and a lot of parts. The beauty of the modern machine is that it is capable of doing the work of what used to require hundreds of human laborers (the Rust model in 1932 could replace 75 workers with one row of cotton: modern pickers can work with six rows of cotton at once, and strippers can handle up to eight). Little more than a century ago, the idea of a machine capable of clearing an entire cotton harvest on its own was no more than a dream.